Bob White's General How To Instructional Videos

As you all know Bob White's instructional videos are very informative and helpful, take your time to let him know how appreciative you are to have his videos available for the RC heli community. HeliTown.COM would like to thank Bob White (finless) for allowing us to continue to provide links to his videos for our members here.

Note: If you have not registered with Helifreak, when you click on the link, you will be brought to Helifreak registeration window. You need to register with www.Helifreak.com before you can watch or download these videos if it is your first time. The registration is free. Once you are registered with Helifreak, you can click the links below and watch or download the videos from here. These vidoes are hosted by Helifreak and HeliTown does no own or has any control on these videos, we only provide links.

How-To Instructional Videos by Bob White (Finless)

General Maintenance Ad-hoc Video (20 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=maintenance.wmv

Trex Electronics placement and overview (28 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=electronics.wmv

Blade Balancing 101 (35 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=blade_balancing101.wmv

Programming the Futaba 9Z for a heli (78 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=9z_programming.wmv

CCPM Setup Part 1 (58 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=CCPM_Part_1.wmv

CCPM Setup Part 2 (58 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=CCPM_Part_2.wmv

Pitch and Throttle Curves 101 (58 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=curves101.wmv

401 gyro setup (48 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=gyro_setup.wmv

Align ESC setup (30 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=esc_setup.wmv

Replacing the Align Auto-rotation Clutch (20 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=auto_clutch.wmv

Soldering Deans Connectors 101 (30 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=soldering_deans101.wmv

Bullet (Motor) Connectors 101 (50 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=soldering_bullets101.wmv

Servo Repair 101 (30 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=servorepair101.wmv

Blade Balancing (30 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=blade_balancing101.wmv

Ball Links 101 (20 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=Ball_Links101.wmv

Canopy Trimming 101 (28 Megs)
http://video.helifreak.com/?subpath=finless/trex450&filename=canopy_trimming_101.wmv

Thread Lock 101 (15 Megs)
http://video.helifreak.com/?subpath=finless/generic&filename=threadlock101.wmv

[leapfrog]

I get "file does not exist" messages when clicking most of the links... but there is a lot of good info that seems to be out there...

Will they be available soon?

Hi leapfrog,
Thanks for checking the links. I checked each one of them and they seem to be working fine. If you got the "file does not exist" message on a particular link, please let me know. I'll look into it.
Thanks

[finless]

They are working for me.

Bob

[nigelc]

I notice the blade tracking video is linked too the blade balancing video, could this be fixed plzzzz :)

Thanks heaps.

Hi nigelc,
Thanks for pointing out. It is really blade balancing video - not blade tracking. I don't think Bob has blade tracking video - Not sure where I got that from :) I corrected the titile now.

[wcairsoft3r]

it wont let me register...it says that im a registered user already,but I havent registered.And when I try loging in,it says that im not an active account user..any help?I need to see these vids!=/


I also had my cousin try to register,but he got the same messages

[eddiemoth]

Hi wcairsoft3r,
Please send e-mail to Helifreak Admin as it is hosted by Helifreak and we don't have any control on their adminitration at all. I'll check with Bob White in case he let us host these videos here.

[Mindless23]

Not that it's really an issue, but just thought I might mention that Blade Balancing 101 is posted twice. ;)

[BobinNJ]

I find it very sad that Bob has to put a disclaimer at the beginning of each video. He is doing such a nice thing and needs to protect himself from us. Sorry, don't want to bring anyone down but I am very moved by his giving of his time to the world at a risk. Thanks Bob