Bob White's Trex 600 Build Instructional Videos

As you all know Bob White's instructional videos are very informative and helpful, take your time to let him know how appreciative you are to have his videos available for the RC heli community. HeliTown.COM would like to thank Bob White (finless) for allowing us to continue to provide links to his videos for our members here.

Note: If you have not registered with Helifreak, when you click on the link, you will be brought to Helifreak registeration window. You need to register with www.Helifreak.com before you can watch or download these videos if it is your first time. The registration is free. Once you are registered with Helifreak, you can click the links below and watch or download the videos from here. These vidoes are hosted by Helifreak and HeliTown does no own or has any control on these videos, we only provide links.


Trex 600 announcement video
http://video.helifreak.com/?subpath=finless/trex600&filename=rexannounce.wmv

What's in the box!! (18 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=inthebox.wmv

Steps 1 and 2 - Blade grips and head (18 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=steps1_2.wmv

Step 3 - Seesaw and flybar (50 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step3.wmv

Steps 4, 5 & 6 - Head, washout, and swash plate (20 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=steps4_5_6.wmv

Steps 7 & 8 - Main gear and frames (25 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=steps7_8.wmv

Step 9 - Tail Drive Assembly (10 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step9.wmv

Steps 10 & 11 - Trays, Motor mount, and Control arms (20 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step10_11.wmv

Steps 12 - Landing Gear (9 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step12.wmv

Step 17 servo install and head set up (step 13 was skipped)

Servo Install and linkage setup (44 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=servo_setup.wmv

Head and link setup (30 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=head_setup.wmv

Installing the motor and setting the pinion (15 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=motor_pinion.wmv

Step 13 and doing the tail of the heli and this will include setting up the servo

Tail boom, tail case, and tail shaft (30 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=steps13_14.wmv

Tail pitch slider and tail hub (22 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step15.wmv

Boom supports and fins (22 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=step16.wmv

Tail servo and gyro setup (35 Megs)
http://video.helifreak.com/?subpath=finless/trex600&filename=gyro_setup.wmv

Final comments from Bob White
http://video.helifreak.com/?subpath=finless/trex600&filename=final.wmv