Receiver Question - Flight sim

[kyuuki]

Ok this is a question about reflex xtr flight sim. BUT its in relation to my futuba T6EXHP which i use to fly my trex.

The problem = the heli on the sim are uncontrolable. if you open channel display all the inputs dash from side to side randomy... it seems that the computer is getting random inputs from the controller.

before i had a controller that came with my walkera 36 and this had no problem atall.

i recently went and bought a cfutuba connector so that i could use reflex with my new controler.

i need to get this thing fixed so i can practice so what do you guys think the problem is? its very odd indeed

Chris

[eddiemoth]

I don' use Reflex but you sounded like when I used my futaba controller with Clearview. When I used my Blade CP controller, everything was perfect but when I changed it to Futaba controller, it seemed like no signal received from the controller. I think I have to reconfigure it with a new controller but it is complicated. So I went back to my Blade CP controller. I hope someone who has Reflex experience chime in.

[Sleepstalker]

I take it that the new connector you bought was for the reflex Sim to Futaba TX? If it was something like a Futaba Din connector to a standard USB plug but made for FMS that won't work. If it is the right connector perhaps uninstalling the Sim then looking in program files folder for any Reflex folder that might be left over and deleting that folder ( you would be suprised how much doesn't get uninstalled properly)! Then with your Futaba TX hooked up reinstall the flight sim. other than trying this and visiting the Reflex web site for possible patches or workarounds I'm outta ideas for the moment... 8)

[kyuuki]

The cable goes from usb to a connector. beofre i had connector to a walkera input

went to the shop i biught it from with my new controller and he sold me the futuba connector

so its usb - connector - connector - futuba end.

I will try and reinstall the program then look for patches, need to get some flight time in before i fly / crash the t-rex again. its been down for almost a week because after crashing i orderd all the parts i thought i needed, fotted them all started it up and found that the main shaft has bent slightly.... so orderd 3 of them should be here tommorrow....

Thx guys

[kyuuki]

nope that didnt work, which means its either the new cable or the tx...