g-force heli
09-03-2006, 07:04 AM
We design and manufacture upgrades for the Raptor helicopters.
G-Force base plate system that:
1. Fully boxes in the bottom of the frame
2. Provides bracing for the engine mount
3. Lower boom brace mount to increase tail boom strength
4. Allows the engine to drop out without removing plate/landing gear
G-Force UL R90 engine mount
1. Increased surface contact for reduced torsional flex on frame
2. 40% lighter than stock mount
G-Force Tuner head for the R30/50 and R60/90
- Uses standard o-rings for easy tuning and consistent dampening.
- Button head uses two screws so loosing the button is reduced.
- Robust design for zero flex
- Triple clamping system so the head will never wobble
- Adjustable phase block
- CNC machined aluminum
Visit our website at www.gforceheli.com for more product updates and videos
G-Force base plate system that:
1. Fully boxes in the bottom of the frame
2. Provides bracing for the engine mount
3. Lower boom brace mount to increase tail boom strength
4. Allows the engine to drop out without removing plate/landing gear
G-Force UL R90 engine mount
1. Increased surface contact for reduced torsional flex on frame
2. 40% lighter than stock mount
G-Force Tuner head for the R30/50 and R60/90
- Uses standard o-rings for easy tuning and consistent dampening.
- Button head uses two screws so loosing the button is reduced.
- Robust design for zero flex
- Triple clamping system so the head will never wobble
- Adjustable phase block
- CNC machined aluminum
Visit our website at www.gforceheli.com for more product updates and videos