Setting up tail servo

[gord165]

I have a Shogun V2 with an Esky EK2-0601 A gyro. When centering my tail servo should I have the collective stick at its lowest position or centered. Gord

[Flycrashfix]

The collective stick have nothing to do whit the tail servo (up and down) so leave it at the lowest position and centered from left to right on both sticks.

[swatson144]

I don't know what your ESC has to do with the tail servo centering. :confused:

If your gyro is HH and you aren't running revo it don't matter. If running rate gyro and revo center the stick to get closer to hovering, and adjust your "eyeball pitch".

After static adjustment switch to rate and adjust to hover with close to no rudder stick or trim.

Steve