basic
03-03-2009, 10:00 PM
Ok, this is non-heli related. Just as a warning -
I had thought I had worked out a trade deal on another site for this truck, but the person trading never replyed nor shipped, so I'm trying again.
I built this truck with the intention of racing it. However, do to changes in my work, i had to work every Saturday (race day) and never got the chance to. Now I've moved and there's no track within an hour of here and I still have to work every Saturday, so no racing for this truck.
Details:
Revo 2.5 chassis custom anodized yellow.
OS .18tm w/ 1/8 air filter and roto start backplate. (less than a gallon through this engine, still very very strong and plenty of compression. I can't turn it over by hand easily with the glow plug out because of the cylinder pinch)
Blue aluminum motor mount
HR Racing front and rear bulkhead braces
blue CF low CG battery tray and RX tray
Teknic throttle servo mount
RPM a-arms all around.
Proline single servo arm and I forget which silver aluminum servo saver
The Hard anodized shock bodies with the TiN shock shafts.
Blue shock socks.
Hitec 645 MG steering servo
Panther pylon tires on the traxxas wheels that have been dyed.
Also comes with a set of proline bowties on the white dish wheels - note these are kinda beat up.
Theres also an aftermarket 2 disk brake rotor (i forget which one, but I think it's 3racing)
Also has the close ratio gear set and FOC.
It's got new stock front and rear bumpers
New stock skid plates (except the tranny one).
RD Logics quick turn front drive shaft (not installed)
This revo does come with 4 beater bodies, all of which have seen much better days. One of the bodies is the stock traxxas one, another is a proline race style body (probably in the worse shape) and a couple others. Pics of the 3 (not the stock traxxas one) are on the link for more pictures listed below. You will need your radio setup. It will come with the servos (hitec 645 mg for the steering and airtronics 94102 on the throttle) and a traxxas 5 cell nimh battery. You will also need a roto-start sytem and a glow plug ignitor as well as other field equipment.
Also, this truck does NOT have a center diff installed. I know, most people who race revos have to have a center diff, but I had installed a RD Logics quick-turn front drive shaft. It is included, but not installed. If you would like it to be installed when you get it, let me know and I'll pull the front end off and install it for you. Otherwise it will be included in the box with the Revo.
Pics can be seen at - http://s83.photobucket.com/albums/j284/basicmods/revo%20sale/ (http://s83.photobucket.com/albums/j284/basicmods/revo%20sale/) or you can contact me with any questions you may have. Thank you.
I have installed yellow zip ties on the OS engine head to protect it since these pics were taken. That's about it.
Price is not set in stone, so make me an offer. Please note that buyer pays all applicable shipping and insurance charges (if applicable) and due to the nature of the hobby the truck is sold AS IS. The truck is a good truck and you should not have any issues with it once you tune it to your local conditions.
Willing to trade for nitro on road cars, wanting to get into parking lot racing. May also be willing to trade for electric plane/heli stuff, depends on the deal. Thanks again for looking! Thank you.
I am asking $350 + shipping
If you have any questions, just ask and I will do my best to respond in a timely manner.
Thanks!!
I had thought I had worked out a trade deal on another site for this truck, but the person trading never replyed nor shipped, so I'm trying again.
I built this truck with the intention of racing it. However, do to changes in my work, i had to work every Saturday (race day) and never got the chance to. Now I've moved and there's no track within an hour of here and I still have to work every Saturday, so no racing for this truck.
Details:
Revo 2.5 chassis custom anodized yellow.
OS .18tm w/ 1/8 air filter and roto start backplate. (less than a gallon through this engine, still very very strong and plenty of compression. I can't turn it over by hand easily with the glow plug out because of the cylinder pinch)
Blue aluminum motor mount
HR Racing front and rear bulkhead braces
blue CF low CG battery tray and RX tray
Teknic throttle servo mount
RPM a-arms all around.
Proline single servo arm and I forget which silver aluminum servo saver
The Hard anodized shock bodies with the TiN shock shafts.
Blue shock socks.
Hitec 645 MG steering servo
Panther pylon tires on the traxxas wheels that have been dyed.
Also comes with a set of proline bowties on the white dish wheels - note these are kinda beat up.
Theres also an aftermarket 2 disk brake rotor (i forget which one, but I think it's 3racing)
Also has the close ratio gear set and FOC.
It's got new stock front and rear bumpers
New stock skid plates (except the tranny one).
RD Logics quick turn front drive shaft (not installed)
This revo does come with 4 beater bodies, all of which have seen much better days. One of the bodies is the stock traxxas one, another is a proline race style body (probably in the worse shape) and a couple others. Pics of the 3 (not the stock traxxas one) are on the link for more pictures listed below. You will need your radio setup. It will come with the servos (hitec 645 mg for the steering and airtronics 94102 on the throttle) and a traxxas 5 cell nimh battery. You will also need a roto-start sytem and a glow plug ignitor as well as other field equipment.
Also, this truck does NOT have a center diff installed. I know, most people who race revos have to have a center diff, but I had installed a RD Logics quick-turn front drive shaft. It is included, but not installed. If you would like it to be installed when you get it, let me know and I'll pull the front end off and install it for you. Otherwise it will be included in the box with the Revo.
Pics can be seen at - http://s83.photobucket.com/albums/j284/basicmods/revo%20sale/ (http://s83.photobucket.com/albums/j284/basicmods/revo%20sale/) or you can contact me with any questions you may have. Thank you.
I have installed yellow zip ties on the OS engine head to protect it since these pics were taken. That's about it.
Price is not set in stone, so make me an offer. Please note that buyer pays all applicable shipping and insurance charges (if applicable) and due to the nature of the hobby the truck is sold AS IS. The truck is a good truck and you should not have any issues with it once you tune it to your local conditions.
Willing to trade for nitro on road cars, wanting to get into parking lot racing. May also be willing to trade for electric plane/heli stuff, depends on the deal. Thanks again for looking! Thank you.
I am asking $350 + shipping
If you have any questions, just ask and I will do my best to respond in a timely manner.
Thanks!!