Esky HoneyBee King

[Therkel]

Hi I'm having a problem with my Heli, everytime I give throotle it just starts to rotate around it self, and I have tried to ajust the servo, but it does not seems to be enought.

and the tail are also vibrating a lot, hope someone can help my it have not even being in the air yet...

[eddiemoth]

Therket,
Tell us some more about your heli so we can get some ideas to help you. If you have pictures, that would be even more helpful. Which side it rotates to and what are the electronics you used, like gyro, etc?

[swatson144]

Sounds like the gyro or servo are reversed (or both).

with the throttle down give the rudder stick some left. The tail rotor should pitch to move the tail to the right (nose left). If not reverse the rudder chan. This is the most likely culprit as some servos are backwards of others.

When that is correct

Move the tail either direction and the gyro should pitch the tail rotor to bring it back to the starting point. If not it needs to be reversed. You may have to jiggle the stick L R LR to center the gyro if it has drifted off neutral.

after that you can start setting it up for good solid flight.

Like Eddie said, more info is good and can allow specific answers.

Steve

[Therkel]

Hey again, have tried but it's does'nt really seems to help, it spins counter clockwise (nose left), when I turn the rudder stick to the right at low throotle it stop rotate, but when I give more throotle it starts rotate again, but I can't give any more rudder, because the rudder controller/arm hits the tail before it stops to rotate

[Bill F]

I cant really help you with the tail problem. I just got my king and am waiting for my battery to arrive. However you fin on the tailboom is on wrong. It should be perpendicular to the groud (sp?)