Trex 450 SA

[Sleepstalker]

A vid of Alan Szabo with a bone stock SA using HS 56 servos and the Align 500x gyro..
http://www.align.com.tw/bb2/mpeg/0014.wmv
I called my LHS I should get my SA next week... 8)

[eddiemoth]

I am excited to hear you'll get yours next week! Cann't wait to hear your review and see your video like othe one done by Alan :)

[Tomcat]

I remember when I saw the Blade Cp Vids piloted by a "Pro" I was so amazed and got one.. hahaha :)

[eddiemoth]

Good for you Tomcat. Life is short. Enjoy while you can.

[caseyjholmes]

Some SA videos I made =)
SA in living room:
http://www.holmesrc.com/files/SainsideHome.wmv
SA first few tricks:
http://www.holmesrc.com/files/SAbudget3D1.wmv
SA: Prerequisite to 3D tutorial (made for runryder thread)
http://www.holmesrc.com/files/SA_3D_prerequisite.wmv
SA: More tricks..
http://www.holmesrc.com/files/Sa_3d_training_2.wmv


Setup for the SA in the videos:
HS55 servos for cyclic
GWS 6ch pico receiver
CSM HLG LW gyro
GWS pico BB tail servo
TP 2100mah 3s
Stock align 430L motor modified with screws through the can into the endbell to prevent it from untwisting.
11T pinion, about 2650 RPM
Purchased from www.Modefosheli.com
=D
-Casey

[eddiemoth]

caseyjholmes,
Do you still have the stock flybar rod on your SA? If yes, can you do me a favor? I want to know if the stock flybar rod is the same length as the stock flybar of Trex450S. So can you measure the flybar rod on your SA for me?
Thanks
Eddie

[caseyjholmes]

I sold it to a friend looking to get started into rc helis RTF for $300 :D
Don't have it any more. I'd help ya there if I could! :cry:
I believe it is the same length as the flybars that came with my SE. It's not the 220mm flybar I don't think..

[Sleepstalker]

Hi Eddie it looks like on my SA that the length of my flybar from marks on paddle depth to the screw in the head button measures 95 mm on my calipers so I would say my stock SA flybar rod length is 190 mm which conforms to the statement that the SA follows all the stock XL and SE dimensions.
Part # HS1006T for 190 mm flybar rod
Part # HS1184T for 220 mm Flybar rod and a more docile cyclic
...Sleepster... 8)

[eddiemoth]

Thanks Sleepstalker. So only Trex450S comes with the 220 mm flybar rod. Good infor to know.